7. Hand controller assembly
•
Remove the battery box, cables, the hand controller and its base from their original packaging.
•
Attach the base to a tripod leg and place the hand controller on the base (image 13).
•
Put eight AA batteries into the battery box (image 14). Batteries are purchased separately.
•
Connect the hand controller to the mount with a special cable. Make sure the RJ-6 connector
(image 15) goes into the hand controller and the RJ-4 connector (image 16) goes into the mount.
•
Use the power cable to connect the battery box to the mount (image 17).
•
Check the connections to make sure everything is working properly (image 18).
4
11. Fully assembled optical tube, with the diagonal mirror
and an eyepiece
*Diagonal mirror is included in standard kits of refractors and
Maksutov-Cassegrain telescopes only.
12. Focuser with an eyepiece
**There is no need to use a diagonal mirror with reflectors;
therefore an eyepiece is inserted directly into the focuser.
13. Hand controller base
14. Battery box accepts eight AA batteries (purchased
separately)
