27
Error notifications Mastermind
10 Error notifications Mastermind
Error notifications will appear in the error screen
accompanied with an accoustic signal.
Mastermind
For all errors please follow the instructions in the display.
Digital
The Digital shows error codes only. Decide with help of
the tables in this chapter what to do.
Always confirm error notifications with the green button.
Here you will find an overview of the most common
errors.
10.1 Maintenance messages
10.2 User errors Mastermind
A user error will occur when you try to do something that
the oven is not capable of doing or is not allowed to do.
For example you cannot ad a phase after the Cook&Hold
phase. The oven will remind you hereof.
Table 1: Various messages
Report in the display
What’s happening
b 1
Boiler needs to be descaled
boiler needs to be
descaled asap
b 2
Boiler needs to be descaled
At next start boiler will be
descaled
CE 1
cleaner empty
cleaning detergent is
finished.
C?-9
various
All C-codes are related to
cleaning.
C8-9
various
Switch oven off and on.
See manual for
instruction on cleaning.
b?-4
various
All B-codes are related to
descaling of the boiler
Table 2: Error Notifications
Report
Error situation
There are no programmes
available
There are no programmes in
the group
There are no groups available
There are no groups
Maximal table planner /
cooking timer time is 99
minutes
Maximal time that can be set
Memory is full
U wants to add a group or
programme whilst the memory
is full
There are no groups
There are no groups
There are no programmes
There are no programmes
Programme name already
exists
Name programme already
exists
Group name already exists
Name group already exists
Important: core temperature
low in respect to previous
phase. This may result in
problems.
U define phase core
temperature after a phase with
a higher temperature
(therefore core already has the
temperature)
PINcode not twice the same
Re-enter the PINcode
Keep the tag in front of the sign
until the notification appears
that you can remove the tag
Tag is being removed too soon
during reading
Keep the tag in front of the sign
until the notification appears
that you can remove the tag
Tag is being removed too soon
during writing
Tag memory is full
Tag full
Memory oven is full
Computer memory is full
Tag is being removed too soon
during reading
Keep the tag in front of the sign
until the notification appears
that you can remove the tag
Cook&Hold is only possible as
last phase
Cook&Hold cannot be used as
an intermediate phase
Starting of the programme is
not possible when the door is
open
Close the door and start over
again
Starting with an open door is
not possible
