Att
ach
m
en
t
fo
r
Fa
ll Pr
otectio
n
m a
x.
2
P
e
rs
.
2
© 2020 · INST_PSA 11/20 · www.halfen.com
HALFEN PSA
Assembly Instructions
Deutsch
English
The supplied identifi cation cap
identifi es the fi xing anchor as an
anchor point suitable for personal
protection equipment for a maximum
of two people.
Area of application
The HALFEN PSA is a fi xing system
for attaching personal protection
equipment (PPE) to prevent fall
in accordance with DIN EN 795
and CEN/TS 16415.
Up to 2 people can be attached to
one single anchor point to safely
carry out construction, assembly
or maintenance work.
The HALFEN PSA Fixing system
(Anchor fi xing point) consists of
the following components:
DEMU Fixing anchor T-FIXX
M16 × 110 (A4 stainless steel) as a
permanent structural fi xed anchor
(in concrete) approved according to
ETA-13/0222; with fi xed cap for
identifi cation as a PSA point
RUD PSA Inox Star eye-anchor M16
as fi xing point for PPE (personal
protection equipment)
The suitability and the static load
capacity of the system has been
verifi ed by the test and certifi cation
body DGUV* Test (Department for
Personal Protection Equipment).
Both components of the HALFEN PSA (Anchor fi xing point) are made of stainless steel (T-FIXX Fixing anchor and the
eye-bolt). This ensures that in addition to use in dry conditions they may also be used in outdoor environments, i.e. in
outdoor weather conditions.
Materials / Corrosions protection
Available separately: suitable,
reusable eye-bolt (stainless steel)
RUD PSA INOX STAR M16
(Order no: 0742.260-00001)
Approved fi xing anchor,
(stainless steel)
DEMU T-FIXX
®
M16, A4,
ETA-13/0222
(Order no.: 0020.270-00508)
ETA-13/0222
Components:
*DGUV = German occupational safety institute
(
Deutsche Gesetzliche Unfallversicherung
)
