iLevil 3 SW
Serial Port
The iLevil 3 SW features a serial port that can be used for data transfer or 5V external power input for automatic ON/OFF operations. For more
information Check the iLevil Relay feature on our website
.
Battery Safety Instructions
Batteries only have about a 30% charge when you receive your iLevil 3 SW
Never charge batteries unattended.
When charging Lithium-Ion Batteries, you should constantly monitor the charging process to be able to
respond to any problems that may occur
Always let batteries cool down to ambient temperature before charging
Charge batteries in a safe area away from flammable materials
Do not expose your device to direct sunlight (heat) for extended periods while operational
When transporting or temporarily storing in an airplane or vehicle, temperature range should be no less than 20
°
F(-12
°
C) and not more than
150
°
F (65
°
C)
Storing Lithium-Ion batteries at temperatures higher than 170
°
F for extended periods of time (more than 2 hrs.) may cause damage to battery
and possible fire
Short Circuits can cause fires!
If you accidentally short the battery, it must be placed in a safe observation area for approx. 15 mins.
Nevertheless, for safety, the unit is protected by a 2 amp fuse which will blow if any component is shorted or when overcharging the battery.
DO NOT disassemble, remodel, drop, or let the iLevil get wet!
