Please read these instructions carefully before using
the product for the first time and store them for future reference. This product must be operated in
accordance with these instructions at all times. Make these instructions for use accessible to all persons
who will be working with this product. This applies also when reselling the product.
We cannot assume any liability for any accidents or damage that may arise due to non-observance of this
guide or the safety instructions contained therein. Any structural modifications to the product will void the
manufacturer’s warranty!
This product is a floor jack for lifting motor vehicles. It is intended for use as a lifting device only. Ensure that
the load to be lifted does not exceed the maximum permissible load of the jack. The maximum load of 2
tonnes must not be exceeded otherwise the jack may become damaged and safety compromised. Use the
jack on a firm, even surface only. Instability or slipping of the load may occur on soft or uneven surfaces.
Consequential damage to the vehicle or persons cannot then be precluded. (Risk of accident!).
Make sure there are no persons inside the vehicle being lifted. Position the hydraulic jack so that no part of
your body will be under the vehicle while it is being lifted. Never work under a car that is being supported
only by the hydraulic jack. Always use additional supports. Before lowering the hydraulic jack, ensure there
are no persons or objects under the vehicle. Never leave the hydraulic jack unattended for longer periods
when it is supporting a load as it can lose pressure and begin to sink for design-related reasons. Therefore
place something underneath the lifted load immediately! Never get into the vehicle or start its engine while it
is on the hydraulic jack.
This product is intended for private use only!
General
warning sign
Warning about
hand injuries
Technical specifications
Intended use / safety instructions
WARNING: Lifting of persons prohibited!
Description:
Garage Jack
Model: T830025
Nominal load:
max. 3 tonnes
Lifting height:
min. 130 mm to max. 465 mm
Total length:
ca. 572mm
Own weight:
ca. 27.4kg
Lifting height with rated load(mm):315-465
Design conforms to the EN1494/A1:2008
Made in China
This floor jack has been TÜV/GS
tested and bears the CE sign.
Summary of Contents for T830025
Page 5: ......
