FIBER CONNECTOR SAFETY WARNINGS
SAFETY INFORMATION
1.
Always wear safety glasses.
2.
Isopropyl alcohol is
and may cause eye irritation. In case of contact with eyes,
with water for at least 15 minutes. When using isopropyl alcohol, always assure
proper levels of ventilation. In case of ingestion, consult a physician immediately.
3.
Never look directly into a laser light source, point source at a person’s eyes, or point
source at
surfaces.
4.
When working on a
link, always turn laser source off, or disconnect completely.
5.
Always dispose of
debris properly, preferably using sticky tabs.
6.
Do not place food or beverages in the vicinity of the work area.
7.
Thoroughly wash face and hands after terminating
8.
Carefully remove any
debris that may have been stuck to clothing, or left in work
area, and dispose of properly.
TIPS AND RECOMMENDATIONS
1.
Using isopropyl alcohol, thoroughly clean exposed
and buffer ensuring both are free
from dust, oil, and debris.
2.
Do not lay ferrule dust covers on a dirty or dusty surface.
3.
Always use proper tools and/or accessories to terminate
and clean connector tips.
TABLE OF CONTENTS
The following instructions will help you quickly install your Leviton Opt-X
®
HDX High Density System Enclosure for
use in your equipment cabinet or rack. For detailed information on each step, go to the page number listed below.
Safety and Installation Instructions
Pg. 2
Table of Contents
Pg. 2
Standard Accessories
Pg. 3
Optional Accessories
Pg. 3
Equipment Overview
Pg. 3
Product Views
Pg. 4
Mounting, Front Door Operation, and Rear Door Operation
Pg. 5
Cable Installation - Preparation
Pg. 6
Cassette Installation and Removal
Pg. 7
Cable Installation - Applications
Pg. 8
Front side patch cable routing,
Opt-X
®
HDX High Density System Labeling
Pg. 9
Page 2 of 30