background image

14

Limited 5 Year Warranty

Copyright and Trademark Information

The Leviton logo and Decora Smart are trademarks of Leviton Manufacturing Co., Inc. Zigbee is a U.S. 
registered trademark of Zigbee Alliance. Use herein of other third party trademarks, service marks, 
trade names, brand names and/or product names are for informational purposes only, are/may be 
the trademarks of their respective owners; such use is not meant to imply affiliation, sponsorship, or 
endorsement. No part of this document may be reproduced, transmitted or transcribed without the 
express written permission of Leviton Manufacturing Co., Inc.

Copyright 2020 Leviton Mfg. Co., Inc.

For Leviton’s limited product warranty, go to 

www.leviton.com. 

For a printed copy of the warranty,  

call 1-800-824-3005. 

FOR CANADA ONLY

For warranty information and/or product returns, residents of Canada should contact Leviton in writing 
at Leviton Manufacturing of Canada ULC to the attention of the 

Quality Assurance Department, 

165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.

FCC COMPLIANCE STATEMENT

The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (i.) This device may not cause harmful interference (ii.) This device must accept any 
interference received, including interference that may cause undesired operation. Any changes 
or modifications not expressly approved by Leviton could void the user’s authority to operate this 
equipment. This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference to radio 
or television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures:

• 

Reorient or relocate the receiving antenna. 

• 

Increase the separation between the equipment and receiver. 

•  

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• 

Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION

Any changes or modifications not expressly approved by Leviton Manufacturing Co., Inc., could void the 
user’s authority to operate the equipment.

FCC SUPPLIER’S DECLARATION OF CONFORMITY:

Model DG15S – Switch is manufactured by Leviton Manufacturing Co., Inc., 

www.leviton.com.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.

IC STATEMENT

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the 
following two conditions: (1) this device may not cause interference, and (2) this device must accept any 
interference, including interference that may cause undesired operation of the device.

RF EXPOSURE AND CO-LOCATION:

To comply with FCC OET Bulletin 65 and ISED RF exposure limits for general population and uncontrolled 
exposure, this device shall be installed and operated with a minimum distance of 7.9 inches (20 cm) 
between the radiator and your body. Also, must not be co-located or operated in conjunction with any 
other antenna or transmitter.

WEB 

VERSION

Summary of Contents for Decora Smart DG15S

















Reviews: