background image

15

Limited 2 Year Warranty & Exclusions 

Copyright and Trademark Information

Decora Smart and Decora are registered trademarks of Leviton Manufacturing Co., Inc. Google Play, 

Android, App Store, Apple iOS, Google Assistant, are the trademarks of their respective owners and any 

use of such marks by Leviton is under license. Z-Wave is a registered trademark and Z-Wave Plus is a 

trademark of Silicon Labs. Use herein of other third party trademarks, service marks, trade names, brand 

names and/or product names are for informational purposes only, are/may be the trademarks of their 

respective owners; such use is not meant to imply affiliation, sponsorship, or endorsement. No part of 

this document may be reproduced, transmitted or transcribed without the express written permission of 

Leviton Manufacturing Co., Inc.

For Leviton’s limited product warranty, go to www.leviton.com. For a printed copy of the warranty,  

call 1-800-824-3005. 
FOR CANADA ONLY

For warranty information and/or product returns, residents of Canada should contact Leviton in
writing at Leviton Manufacturing of Canada Ltd to the attention of the Quality Assurance Department,
165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1-800-405-5320.
FCC COMPLIANCE STATEMENT
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following 

two conditions: (i.) This device may not cause harmful interference (ii.) This device must accept any 

interference received, including interference that may cause undesired operation. Any changes 

or modifications not expressly approved by Leviton could void the user’s authority to operate this 

equipment. This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This equipment generates uses and can radiate 

radio frequency energy and, if not installed and used in accordance with the instructions, may cause 

harmful interference to radio communications. However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to 

correct the interference by one or more of the following measures:

• 

 

Reorient or relocate the receiving antenna.

• 

 

Increase the separation between the equipment and receiver.

• 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• 

 

Consult the dealer or an experienced radio/TV technician for help.FCC CAUTION

Any changes or modifications not expressly approved by Leviton Manufacturing Co., Inc., could void the 

user’s authority to operate the equipment.
FCC SUPPLIER’S DECLARATION OF CONFORMITY:
Model DZ15R – outlet is manufactured by Leviton Manufacturing Co., Inc., 201 N. Service Rd., Melville, NY 

11747. www.leviton.com. This device complies with part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, and (2) this device must 

accept any interference received, including interference that may cause undesired operation.
IC STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the 

following two conditions: (1) this device may not cause interference, and (2) this device must accept any 

interference, including interference that may cause undesired operation of the device.
RF EXPOSURE AND CO-LOCATION:
To comply with FCC OET Bulletin 65 and ISED RF exposure limits for general population and uncontrolled 

exposure, this device shall be installed and operated with a minimum distance of 7.9 inches (20 cm) 

between the radiator and your body. Also, must not be co-located or operated in conjunction with any 

other antenna or transmitter.

DR

AF

T

Summary of Contents for Decora Smart DZ15R

















Reviews: