LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for five
years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option, if within such five year period the product is returned prepaid, with proof of purchase date, and a description of
the problem to
Leviton Mfg. Co., Inc. 201 North Service Road, Melville, N.Y. 11747. This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product
is installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions.
There
are no other or implied warranties of any kind, including merchantability and fitness for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty,
including merchantability and fitness for a particular purpose, is limited to five years.
Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use
of, any equipment, lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
© 2010 Leviton Mfg. Co., Inc.
PK-93694-10-00-2A
Programming your Timer Options:
Setting Sunup, Sundown, desired Offset Time and Time Zone:
Sunup
and
Sundown are automatically adjusted using the latitude and longitude coordinates of your location. To obtain these
coordinates go to
www.leviton.com/VPT24 and click on Longitude/Latitude Coordinates Lookup... Type in your home
address and press enter. Your latitude (N) and longitude (W) coordinates will be shown on the screen. Write down only the 2
or 3 digit number. Disregard a negative symbol
(–) if it preceeds the number. The time zones are limited to the North American
Continent. The options you are presented are determined via your longitude in the chart to the right:
• On your timer press until
SUN appears at the bottom of the screen and press to confirm your choice.
• Use or to choose your latitude (N) and press to confirm your choice.
• Use or to choose your longitude (W) and press to confirm your choice.
• will be flashing to represent the offset time. Choose the amount of time, if any, to turn the load ON/OFF before or after
Sunup
and
Sundown by pressing to add time to
the
Sunup/Sundown time and use to subtract time from the Sunup/Sundown time. Press to confirm your choice (up to 3 hours and 59 minutes).
• will appear. The time zone closest to the coordinates you entered will flash. Press if this is correct. If this is not correct use or to choose your time zone
and press to confirm your choice.
SET
SET
SET
SET
SET
SET
MENU
Setting ON/OFF Events:
• Press until
PRG is in the lower left corner. Press to enter the programming mode.
•
Event 1 will be flashing. Press to choose this event or use to move to the next event and press to confirm your event
number choice.
• All days of the week will be flashing. Press to choose all days of the week or use or to scroll through
M-F
,
Sa-Su, any single day
or combination of days.
NOTE: To choose a combination of days press after each day you want and then move on to the next day by pressing
or
. Continue to scroll using until
PRG flashes.
• When done choosing the desired days
PRG in the lower left corner will flash. Press to confirm the chosen days and continue on to choosing the
event
TURN ON TIME
.
• At use or to choose for time, for
Sundown, for Sunup or to delete an existing program and press
to confirm your choice.
• If is chosen, use or to choose the hour and press to confirm your choice. Do the same for minutes.
• At
6:00P press to choose a TURN OFF TIME or use or to choose for Sundown, for Sunup
or to delete an
existing program and press to confirm your choice.
• If is chosen, use or to choose the hour and press to confirm your choice. Do the same for minutes.
• Continue to set desired events in the same manner. When this is done press to escape out of programming. If no buttons are pressed after
approximately 30 seconds the device will automatically exit out of programming mode.
SET
SET
SET
SET
SET
SET
MENU
6
PM
6
AM
Event
6
PM
6
AM
Event
MTWThFSaSu
6
PM
6
AM
Event
M F Su
SET
SET
SET
SET
SET
OVERRIDE
• Activate Temporary Override by pressing to toggle the load (ON to OFF or OFF to ON).
• Activate Permanent Override by pressing and holding for several seconds to maintain the load in the current state (either ON or OFF).
• LT113 - Advanced Timer has a tethered remote which will function as the OVERRIDE button.
Timer Overrides
OVERRIDE
OVERRIDE
Changing Settings
• Press until
CLK appears at the bottom of the screen . Press to enter this mode. Adjust the clock using or and pressing after each setting.
SET
MENU
SET
Turning Random Mode ON/OFF (Pro Mode ONLY):
This function will add or subtract anywhere from 1 to 20 minutes to each selected
ON
and
OFF time to create a random pattern.
• Press until
RND appears at the bottom of the screen and press to enter this mode.
• Use or to toggle between and and press to confirm your choice.
SET
SET
MENU
Delete All Events
lf at any time you want to delete all of your programmed events, you can perform a
Delete All Events function:
• Press and hold followed by until starts flashing.
•
Press
to confirm
DELETE ALL EVENTS. All events will be deleted from your device and the Timer Schedule at a Glance will appear with only the current time segment flashing.
SET
SET
OVERRIDE
• Degree of protection: IPX0
• Type Action: Type 1
• Additional features Actions: Type 1.C.R
For additional information, contact Leviton’s Techline at 1-800-824-3005 or visit Leviton’s website at www.leviton.com
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation of the device.
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving Antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/tv technician for help.
FCC CAUTION
Any changes or modifications not expressly approved by Leviton Manufacturing Co., Inc., could void the user's authority to operate the equipment.
Installation
• For all timers except LT114, plug the controlled load into the receptacle on the timer, and plug the timer into the appropriate wall receptacle.
• For the LT114, plug the controlled load into the receptacle on the plug, and insert the plug into the wall receptacle.
• The LT113 comes with a tethered remote. Plug the remote into the jack located on the side of the timer. Pressing the button on remote will function as if pressing the override
button on the timer.
TIME ZONE CALCULATIONS
Longitude
60° – 80°
81° – 95°
96° – 110°
111° – 135°
136°-143°
144°+
Time Zone
Eastern
Eastern, Central
Central, Mountain
Mountain, Pacific, Alaskan
Pacific, Alaskan, Hawaii-Aleutian
Alaskan, Hawaii-Aleutian
