FIBER CONNECTOR SAFETY WARNINGS
SAFETY INFORMATION
• Always wear safety glasses.
•
Isopropyl alcohol is flammable and may cause eye irritation. In case of contact with eyes, flush with water for at least
15 minutes. When using isopropyl alcohol, always assure proper levels of ventilation. In case of ingestion, consult a
physician immediately.
• Never look directly into a laser light source, point source at a person’s eyes, or point
source at reflective surfaces.
•
When working on a fiber link, always turn laser source off, or disconnect completely.
•
Always dispose of fiber debris properly, preferably using sticky tabs.
• Do not place food or beverages in the vicinity of the work area.
•
Thoroughly wash face and hands after terminating fiber.
•
Carefully remove any fiber debris that may have been stuck to clothing, or left in work
area, and
dispose of properly.
TIPS AND RECOMMENDATIONS
•
Using isopropyl alcohol, thoroughly clean exposed fiber and buffer ensuring both are free
from dust, oil,
and debris.
• Do not lay ferrule dust covers on a dirty or dusty surface.
•
Always use proper tools and/or accessories to terminate fibers and clean connector tips.
QUICK START GUIDE
The following instructions will help you quickly install your Leviton Opt-X
®
Wallmount Enclosure for use in your equipment
cabinet or rack. For detailed information on each step, go to the page number listed below.
Safety
Instructions Pg.
2
Quick
Start
Guide
Pg.
2
Equipment
Guide
Pg.
3
Standard
Accessories
Pg.
4
Optional
Accessories
Pg.
4
Required
Hardware
and
Tools
Pg.
4
Configurations
Pg. 5
•
Adapter Plates
•
Splicing
•
SDX Cassette
Mounting
Pg. 5
Grommet Preparation and Use
Pg. 5
Cable Installation Applications
•
Adapter
Plates
Pg.
7
•
SDX
Cassette
Pg.
7
•
Splicing
Pg.
8
Grounding
armored
cabling
Installing the optional lock kit
Pg. 10
Labeling
Pg.
11
Page 2 of 11
PK-A3188-10-00-0B
