Leviton Programmer/Remote, User Manual

The RZCPG will prompt you to 

stand within 3 feet of that controller. 

Press the right soft key      

(YES)

to update your controller. 

NOTE:

It is important that you remain 

within 3 ft. of the controller 

you've selected from the list. 

If you are unsure about which 

controller you are updating 

you can use the "who Is" 

command (see pg. 13).

Leviton controllers will blink 

during the update process, 

confirming you are updating 

the correct controller. Update 

only one controller at a time.

Once the RZCPG confirms 

UPDATE

 it will display 

the updated node information. Press left soft 

key      

(Return)

. Continue this process until all of 

your controllers have been updated. Each time 

you successfully update your controller it will be 

removed from the list. Once all of your controllers 

have been updated, press the right soft key      to 

continue to the 

NEXT STEP.

Create Areas

NOTE:

 The 

INSTALL 

CHECKLIST

 screen will appear 

with the selection box around 

STEP 4 - Create Areas

 when 

NEXT STEP

 is chosen from 

STEP 2

.

Press the center button       to  

bring up the 

AREA

 screen. With  

<< NEw >>

 selected press the 

center button       to bring up the 

CREATE AREA

 screen. You 

can now name your new area 

by pressing the center button   

(refer to TEXT EDITOR pg. 6). 

Once you name your new area, 

press the center button       to 

save the information and return 

to the 

CREATE AREA 

screen.

x1

NO

YES

UPDATE

Please stand within
3 ft from controller
and press YES
to continue

x1

Return

UPDATE

Node Updated!

Node ID #4
Room controller

STEP 4

x1

Cancel

CREATE AREA

 Name: Area #1
 Add Devices...

Save

8

x1

Back

Next Step

AREA

<< NEW >>

x1

Back

INSTALL CHECKLIST

1. Include Dim/Swch
2. Include Controller
3. Update Controller
4. Create Areas
5. Set Associations

Next Step