Leviton Programmer/Remote, User Manual

as a secondary remote to 

the network. Press the right 

soft key

       (YES)

 after the 

prompt to continue. 

NOTE: 

This step will erase any 

existing data in the remote.

You will then be required to 

include this remote with your 

primary controller. 

follow 

the controller inclusion/

replication process of 

your primary controller 

(for RZCPG see pg. 7).

 This 

secondary remote will prompt 

you to start building the 

node list. Press right soft key     

(YES)

 to complete.  

A confirmation (version) screen 

will display the same Home ID 

as the primary, a new Node 

ID, a new serial number and 

an 

x2

 designation at the top. 

NOTE:

 The secondary remote will be populated 

with 

only the device data

 of the primary remote 

(not Areas, Profiles)

. You can create new Areas 

and Profiles with your secondary remote. If you 

wish to duplicate the secondary RZCPG remote 

with the primary RZCPG remote's application 

information, use RZCPG Utilities.  

7.  RZCPG Utilities 

This feature allows you 

to duplicate all necessary  

network data from a primary 

RZCPG remote into your 

secondary RZCPG remotes. 

1.

Get Data

 is selected from 

the receiving RZCPG 

remote to retrieve the 

selected data (Areas, 

Profiles,) from the sending 

RZCPG remote.

2.

SEND data

 is selected 

from the primary RZCPG 

remote to transfer the 

x1

NO

YES

JOIN AS SECONDARY

WARNING!

This step will erase

all the data

Continue?

x1

NO

REMOVE FAILED

YES

Bedroom

Node 2

Remove?

x2

NO

YES

JOIN AS SECONDARY

Would you like

to start building

node list?

17

x1

Back

Home

RZCPG UTILS

1. Get Data
2. Send Data
3. Update DB (Man)
4. Update DB (Aut)

x1

Back

Home

TX DATA

When prompted

on receiving unit

press one of the

group buttons