Leviton Programmer/Remote, User Manual

Press the center button       on the 

RZCPG to bring up the 

INCLUDE 

CNTRLLER

 screen, where you will 

be prompted to place the controller 

in program mode.

NOTE: 

Leviton Controllers require 

an inclusion process that differs 

from Dimmers, Switches and Plug-

In Modules. Controllers must be placed into program 

mode before they can be included into the network 

(refer to individual device instruction sheet). 

NOTE: 

If no controllers are in system, use down arrow 

button       to skip to 

STEP 4.

Once your controller has been placed in program 

mode, press the center button       on the RZCPG. The 

RZCPG will go through the communication process 

and assign the node information for that device. 

The 

TEXT EDITOR

 will display where you can name your 

device 

(refer to TEXT EDITOR pg. 6)

.

Once your name is displayed, 

press the center button      .The 

RZCPG will confirm inclusion 

and prompt you to continue to 

INCLUDE CONTROLLER

 by 

pressing the center button       or 

to continue to the 

NEXT STEP

by pressing the right soft key        

NOTE:

 The confirmation process will take some time, 

specifically in large networks. Remain close to the 

controller until the confirmation is complete.

Update Controller

NOTE:

 The 

INSTALL CHECKLIST

screen will appear with the 

selection box around 

STEP 3 

- Update Controller

 when 

NEXT 

STEP

 is chosen from 

STEP 2

.

Press the center button        to 

bring up the 

UPDATE CNTRLS

screen where a list of all the 

controllers in the network will be 

displayed. With the selection box 

around the first controller listed 

press the center button       . 

7

x1

Return

INCLUDE CNTRLLER

Place controller
in program mode
See Instruction sheet

Begin? Press

x1

Back

Next Step

    Node included!
Node ID #3:
Room Controller

INCLUDE CNTRLLER

More? Press

STEP 3

x1

Back

INSTALL CHECKLIST

1. Include Dim/Swch
2. Include Controller
3. Update Controller
4. Create Areas
5. Set Associations

Next Step

x1

Back

(2)

Who Is

UPDATE CNTRLS

Room Controller
Hall Controller

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu