User Manual for PuraLev
®
2000SU
www.levitronix.com
PL-4034-00, Rev02, DCO# 20-144
39
8
Appendix
8.1 Regulatory Status
8.1.1 CE Marking
The
Centrifugal Pump System PuraLev
®
2000SU
, in its various configurations, is in conformity with the
below mentioned
European Directives
. The pump system is thought to be used in hydraulic circuits of
production equipment of the Semiconductor, Chemical and general machinery applications.
Machinery Directive 2006/42/EC:
The machinery directive essentially has been followed by a risk analysis, according mitigation actions and a user manual
for safe operation. For the design and testing the following standards are used as a guideline:
EN809
Pumps for Fluids: basic requirements are followed.
EN12162
Procedure for hydrostatic pressure testing in fluid pumps: used for max. pressure testing of pump head.
ISO12100
Safety for machinery
– principles for risk assessments: used for system risk analysis.
EMC Directive 2014/30/EC:
The following standards of the EMC directive are tested and confirmed at a certified laboratory:
EN61000-6-2
Generic standards, Immunity for industrial environments
EN61000-6-4
Generic standards, Emission standard for industrial environments
Low Voltage Directive 2014/35/EC:
The low voltage directive essentially has been followed by a risk analysis, according mitigation actions and a user
manual for safe operation. For the design and testing the following standards are used as a guideline:
EN61010-1
Safety requirements for electrical equipment: 3
rd
party tested.
ISO12100
Safety for machinery
– principles for risk assessments: used for system risk analysis.
8.1.2 Disposal of Equipment
– WEEE Directive 2012/19/EU
Follow local legislation for disposal of equipment. In the European Union (EU) marked (
) devices are governed by the
European WEEE Directive 2012/19/EU. Do not dispose with normal waste.
8.1.3 IECEE CB Safety Certification
Specific motors with pump heads and controllers of the
Centrifugal Pump System PuraLev
®
2000SU
are
3
rd
party tested and certified by
Electrosuisse
following the
IECEE CB Scheme
according to the following
safety standards:
IEC61010-1
Safety requirements for electrical equipment for measurement, control and laboratory use.
The CB certification number is
CH-7546
.
8.1.4 NRTL/ETL Safety Certification and Marking
Specific motors with pump heads and controllers of the
Centrifugal Pump System PuraLev
®
2000SU
are
tested by the US national recognized laboratory (NRTL)
Intertek
according to the following safety standards:
UL61010-1
Safety requirements for electrical equipment for measurement, control and laboratory (US Standard).
CSA-C22.2
No. 61010-1-12
Safety requirements for electrical equipment for measurement, control and laboratory use (Canadian Standard).
UL1004-1
Rotating Electrical Machines - General Requirements (US standard).
The ETL control number for the listing is
4010272.
