EN
8
G E T T I N G STA RT E D
1.
Remove all packaging.
2.
Take the water tank off of the base and
remove all tape
.
[
Figure 1.1
]
3.
Rinse and reassemble all parts before first use
(see
Cleaning
, page 9).
Figure 1.3
Figure 1.1
Figure 1.4
Figure 1.5
Figure 1.2
Note:
•
Check to make sure that the water filter
is correctly in place. If not, then rotate
the filter clockwise to secure it in place.
[
Figure 1.2
]
4.
Choose a hard, flat location for the humidifier
at least 30 cm / 12 inches away from any
walls. The surface must be water-resistant.
[
Figure 1.4
]
5.
Mist should be directed away from walls,
furniture, bedding, and appliances.
[
Figure 1.5
]
•
Check to make sure that the float is
securely in place.
[
Figure 1.3
]
Filling & Refilling
1.
Turn the humidifier off.
2.
Remove the water tank cover by holding the
nozzle and pulling upward.
[
Figure 1.6
]
3.
Fill the tank with room-temperature water.
[
Figure 1.7
]
Figure 1.6
Figure 1.7
4.
Replace the water
tank cover.
Note:
•
We recommend using purified or distilled water
to fill the tank.
•
Do not
fill past the tank’s max water line.
•
Do not
fill with hot water.
Figure 1.8
Figure 1.9
•
Do not
add water directly into the base
chamber.
[
Figure 1.8
]
•
Do not
add water through the mist tube.
[
Figure 1.9
]
CAUTION
Note:
Make sure the water tank is clean before filling.
Figure 1.10
Note:
Make sure the
nozzle on the water tank
cover is placed over
the mist tube, or the
humidifier may not work
correctly.
[
Figure 1.10
]
12 in /
30 cm
12 in /
30 cm
Summary of Contents for Dual 150 LUH-D302-BEU
Page 57: ...Notes...
