background image

12

Warm Mist 

Setting

Nozzle Temperature 

(+/- 5%) 

Low Heat

104ºF / 40ºC 

Medium Heat

122ºF / 50ºC

High Heat

140ºF / 60ºC

Room 

Relative Humidity *

Automatic

Mist Level 

Under 50% 

High

50–55% 

Medium

55–60%

Low

Over 60% 

Automatic Stop

Warm Mist (cont.)

Auto Mode

Turning Off the Display

Sleep Mode

Auto Mode uses the humidifier’s sensor 

to automatically adjust the mist level to 

maintain a target humidity level. The default 

target humidity level is 60%.

Sleep Mode changes the humidifier’s mist 

setting to low and turns off the display lights, 

making it ideal for sleep. Sleep Mode can 

only

 be used with cool mist.  

The display will automatically dim after 3 

seconds of inactivity.  

*If you change the target humidity from 

60% in the VeSync app, the humidity 

percentages will change accordingly.

Note:

 

You can use the VeSync app to change 

the target humidity level to fit your needs.

Note:

 

Sleep Mode automatically turns off 

warm mist to reduce noise levels.

Note:

 

The humidifier will automatically mist 

for 15 seconds after being turned on, even 

if the room has reached the target humidity 

level.

1. 

Press           to turn Auto Mode on.

2. 

Optionally, press        to turn on warm 

mist and adjust the warm mist setting.

3. 

By default, Auto Mode uses Automatic 

Stop. The humidifier will stop misting 

when the highest target humidity level is 

reached (default 60%).

• 

Press          to turn Sleep Mode      

on/off. 

• 

When Sleep Mode is on, you can 

press any button to wake up the 

display. If you stop touching the 

display, the display will turn off 

again after 6 seconds.  

• 

Once you wake up the display, 

press any button to exit Sleep Mode 

and resume manual controls.  

• 

To turn off the display, press and 

hold        for 3 seconds. 

• 

To turn the display back on, press 

any button. 

Note: 

• 

In the VeSync app, you can turn 

Automatic Stop on/off.  

• 

If Automatic Stop is off, the humidifier will 

keep running on low mist level when the 

highest target humidity level is reached. 

4. 

The humidifier will continue detecting 

the humidity level in the room. It will 

start and stop misting again according 

to the following table: 

Summary of Contents for LV450S





























Reviews: