Cleaning the Filter
The Pre-Filter should be cleaned once a
month to increase efficiency and extend the
life of your filter.
1.
Remove the filter from the housing and
clean the Pre-Filter with a soft brush or
vacuum hose to remove hair, dust, and
large particles.
2.
Carefully peel the Pre-Filter away from
the True HEPA and Activated Carbon
Filters.
[
Figure 2.1
]
3.
Gently wash the Pre-Filter under running
water. Dry completely before placing it
back on the velcro tape.
4.
Replace filter in housing.
Filter
When to
Clean
When to
Replace
Pre-Filter
Vacuum
every 2–4
weeks
6–8 months
Wash every
1–2 months
True HEPA
& Activated
Carbon
Filter
Do not
clean
Note:
Do not
clean the True HEPA and
Activated Carbon Filters.
CARE & MAINTENANCE (CONT.)
1.
Unplug the air purifier and remove the
filter cover.
2.
Remove the old filter and properly
dispose of it.
3.
Clean out any remaining dust or hair
inside the air purifier using a vacuum
hose.
Do not
use water or liquids to
clean the air purifier.
[
Figure 2.2
]
4.
Unwrap the new filter and place
inside the air purifier with the pull
tabs facing out.
5.
Replace the filter cover. The air
purifier will not power on unless the
filter cover is replaced correctly.
6.
Reset the Check Filter Indicator
(see page 11).
Replacing the Filter
Storage
If not using the air purifier for an extended
period of time, wrap the filter in plastic
packaging and store in a dry place to
avoid moisture damage.
Figure 2.2
EN
12
