INSTALLATION–ADDITIONAL COMPONENTS
13
HOLD-DOWN BRACKETS (optional)
•
Ideal for doors, hold-down brackets prevent blind from swaying. Assemble as
shown to each side of bottom rail.
Inside Mount
Outside Mount
Starter hole
Hold-down
pin
Motorized Tilt Operation
ATTACH VALANCE
•
Locate the valance clip location
indicators on the backside of the
valance that read "Clip Here."
•
Insert the clips into the groove on
the backside of the valance. Rotate
so that the end marked "TOP"
arrow is pointing up.
•
For returns, insert L-shaped return
clip into the groove on the backside
of the valance return. Align and
insert the other end of the L-shaped
return clip into the groove on the
backside of the valance.
•
Attach battery clips (2) to the
valance by inserting into the
groove and rotating to lock
in place.
•
Snap battery tube into the battery
clips and position the end with the
plug to the right.
•
Align the clips with the slots on
the bottom of the headrail and
clip into place.
Return clip
(OM only)
"Top" or
arrow end Valance clip
Return clip
(OM only)
Valance
Valance and Battery Clip
Valance and Battery Pack
Slots
