Lewmar OCEAN & EVO® Electric/Hydraulic Winches ref B2303 Iss.14 | 9
3.6-1
OCEAN
EVO
®
(x)
mm
(Min.)
(x)
inch
(Min.)
Nm
40
40
30
11/4
5 x M6 (1/4”)
9
46-48
45-50
33
1
5
/
16
5 x M8 (
5
/
16
”)
21
50/54
55
33
1
5
/
16
6 x M8 (
5
/
16
”)
21
58
-
36
1
7
/
16
5 x M10 (3/8”)
43
65
65
38
11/2
5 x M10 (3/8”)
43
68-77-88
70-80-90
31
11/4
8 x M10 (3/8”)
43
T
3.6-2
21 Nm
LOCTITE
®
#15
B0678 x 5
3.7-1
2. If a thick deck or increased motor/gearbox
distance from deck demands a greater ‘T’
dimension (see section 8). Optional extension
kits are available to special order, please
contact your nearest Lewmar office.
NOTE: Optional Lewmar “FAST FIT” studs screw
directly into the base of the winch without having to
remove the drum. Contact Lewmar for more details.
3.6 Fastenings
NOTE: Deck fastenings are not supplied.
1. Fix the winch to the deck using CSK Head, stainless steel washers and locknuts.
Use the table below to calculate the correct bolt length for your deck thickness.
3.7 Electric winch motor/gearbox coupling
Winches 40-65
1. These winches require the base motor coupling
and shim to be fitted. Apply Loctite® threadlock
to coupling bolts (# 15), insert isolation shim and
secure to winch base plate. Assemble coupling
bolts and washers, apply Loctite® threadlock and
secure to 21Nm.
• Lightly coat the drive shaft with grease. Ensure
the drive key is in place. Select the most suitable
position and slide motor/gearbox into position,
assemble bolts and washers, apply Loctite®
threadlock and secure to 43Nm.
Summary of Contents for EVO 40
Page 38: ...38 GB Notes...
