23
A battery must be used to retain the motherboard con
fi
guration in CMOS RAM.
Close Pin1 and pin 2 of JSB1 to store the CMOS data.
To clear the CMOS,follow the procedures below:
1. Turn off the system and unplug teh AC power
2. Remove DC 12V power cable from DC 12V power connector
3. Locate JSB1 and close pin 1-2 for few seconds
4. Return to default setting by close pin 1-2
5. Connect DC 12V power cable back to DC 12V Power connector
JSB1: CMOS Data Clear
2-9 CMOS Data Clear
Note: Normal work is open jumper
JSB1
Note: Do not clear CMOS unless
1. Troubleshooting
2. Forget password
3. You fail over-clocking system
JSB1
Description
1-2
Normal set
2-3
CMOS data clear
1
1
3
3
2
2
*Normal
Clear Setting
Summary of Contents for 3I380D Series
Page 8: ...3 2 1 3 1 2 3 Photo 1 Insert Unplug...
Page 50: ...45 4 6 1 Boot Configuration Select Power on state for Numlock default is ON Numlock...
Page 51: ...46 4 6 2 PCI Express Configuration PCIe 1 2 3 4 configuration settings...
Page 56: ...51 4 6 4 Video Configuration Logo SCU Resolution 1024 x 768 Default 800 x 600 640 x480...
