77
Video Off in Suspend
This determines the manner in which the monitor is blanked.
Yes
Video will off.
No
Video always On.
MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
The settings are: 3(default), 4, 5, 7, 9, 10, 11, NA.
PCI Express PME
TUse this item to enable PCI activity to wake up the system from a power saving mode.
Wake-Up by PCI card /Power On by Ring
Disabled
(default) the system will ignore any incoming call from the PCI
card/modem.
Enabled
the system will boot up if there’s an incoming call from the PCI
card /modem.
Resume by Alarm
This function is for setting date and time for your computer to boot up. During Disabled, you
cannot use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note:
If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work
4-8-1 PCI Express PM Function
Phoenix -AwardBIOS CMOS Setup Utility
PCI Express PM Function
Item Help
PCI Express PME [ Enabled ]
Menu Level >
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
↑↓← →
Summary of Contents for MI945A
Page 5: ...DEC 08 2008 2008...
