PowerGATE™ Emergency Lighting Transfer Switch
Contact Lex Products:
800.643.4460 info@lexproducts.com
3
Introduction
–
This manual details the installation and use of your Lex Emergency Lighting Transfer Switch. Before installation read this manual in
its entirety. Store this manual in a safe location for future reference.
–
How to use this manual:
• This manual covers two product variants
◊
LELTS–XX-1 has individual 120VAC, 20A circuit emergency power feeds for each output circuit (Discrete feed)
◊
LELTS-XX-3 has a single 120/208 3Ø emergency power feed (Main feed)
• For the remainder of the document the different variants will be referred to as “discrete feed” and “main feed”
WARNING
–
This equipment has the potential to be the source of an electric shock hazard. Take extreme caution when the cabinet door is
opened and the system is energized
–
This equipment should only be installed, commissioned and serviced by qualified service personnel
–
Tools Needed:
• Blade screwdriver (3/16” blade)
• Phillips screwdriver
• Metric Allen key set (Main feed panels only)
• Socket wrench for mounting bolts
• Drill suitable for drilling holes in wall to mount the panel
• Metal punches to make conduit entry holes in cabinet
• Wire strippers
• Pliers
• Anchors suitable for the wall that the ELTS is to be mounted on are required, and are not included.