16
17
ENGLISH
Your Bluetooth® Sound Tower remote control works with 1 x CR2025 3V
Lithium type battery (included).
When you use the remote control for the first time:
1. Pull the clear tab from the battery compartment located
at the bottom of the remote.
2. Install the 1 x CR2025 3V
Lithium battery (included).
3. Close the battery compartment.
Non-rechargeable batteries are not to be recharged. Rechargeable batteries
are to be removed from the product before being charged. Rechargeable
batteries are only to be charged under adult supervision. Different types of
batteries or new and used batteries are not to be mixed. Only batteries of the
same or equivalent type as recommended are to be used. Batteries are to
be inserted with the correct polarity. Exhausted batteries are to be removed
from the product. The supply terminals are not to be short circuited. Do not
throw batteries into a fire. Remove the batteries if you are not going to use the
product for a long period of time. Battery shall not be exposed to excessive
heat such as sunshine, fire or the like.
WARNING: Malfunction or loss of memory may be caused by strong frequency
interference or electrostatic discharge. Should any abnormal function occur,
remove the batteries and insert them again.
BATTERIES INFORMATION FOR REMOTE CONTROL
NOTE:
• Only use the adapter supplied with the product. Do not use other adapter.
• The socket-outlet shall be installed near the equipment and shall be easily
accessible.
• After plugging adapter in, please wait three seconds before pressing POWER
button on the top panel.
WARNING: Malfunction or loss of memory may be caused by strong frequency
interference or electrostatic discharge. Should any abnormal function occur,
unplug the AC adapter from the mains socket and plug it back in.
BT910seriesIM1176_101_V19.indd 16
28/4/16 6:32 pm
