17
ENGLISH
Signal Strength of SIM 1: Strength of the received signal. The greater
number of bars, the better the signal strength.
Signal Strength of SIM 2: Strength of the received signal. The greater
number of bars, the better the signal strength.
New Message: A new incoming text message is unread.
Ring mode: Appears when the ring mode is active.
Vibrate and Ring mode: Appears when this profile is active.
Vibrate mode: Appears when vibration mode is ON.
Silent Mode: Appears when the silent mode is active.
Alarm On: Appears when the alarm is set.
Lock: Appears when the keypad is locked.
Power Reserve: Full means that battery is completely charged.
Headset: Appears when wired headset is plugged in. Headset user
profile is automatically set.
Description
Icons
DISPLAY ICONS AND INDICATORS
The home screen display includes 3 areas
Status bar
SIM status bar
Soft Key area
BEFORE USING
CONTENTS OF THE PACKAGING
SIM
Before using your phone you must insert a valid SIM card.
NOTE:
Make sure your SIM cards are installed properly; simply align the grooves of the
SIM card to the SIM card slot.
Inserting and Removing the SD memory card
Use approved and compatible SD memory cards.
1. Turn off the phone, remove the back cover and take out the battery.
2. Slide the SD card clip and unlock it.
3. Lift the clip, and insert the card into it with the side of golden contacts facing down.
4. Put down the clip and slide it back to the locked in position.
5. Put in the battery and apply the back cover.
Dual SIM
When powering ON the GSM20series with two SIM cards, default is ‘Dual SIM open’.
In Settings, you can change to use SIM 1 or SIM 2 as open to make calls and send
messages.
Note:
1. It is not necessary to have 2 SIMs inserted at all times. The phone operates when there
is only 1 SIM as well as 2.
2. Travelling to different regions/countries, SIM cards do not switch automatically. You
need to select which SIM you want to use before calling or sending a text, otherwise
GSM20series will use the default SIM card.
3. While you are using one of the SIM cards for calls, if you received a phone call on the
other SIM card, the second phone call will be directly transferred to voicemail.
Powering On and off the phone
Start and Shutdown: Press the power key (end call button) to start or shut down the mobile
phone. If you are prompted to input a PIN or UPIN, please enter the required password.
When unpacking, ensure that the following elements are included:
1 x Cell phone / 1 x USB cable/ 1 x headset / 1 x Instruction manual
WARNING:
All packaging materials, such as tape, plastic sheets, wire ties and tags are
not part of this product and should be discarded for your child’s safety.
GSM20seriesIM1344_22Aug_V11.indb 17
22/08/2014 5:17 PM