20
ENGLISH
SPECIFICATIONS
USING THE BATTERY
• Name: GSM20series
• Quad-band cell phone (850/900/1800/1900)
• SIM: Dual SIM
• Compact size (108 x 45 x 13mm) and lightweight (70g)
• 1.77” TFT screen
• Digital camera 0.3MP
• Lithium battery (included) – 650mAh, 3.7V
Input: 5V
0.5A
• Battery: Battery up to 3 days standby (2 hours talk time)
• Charger: USB cable
How to remove and insert battery
1. Turn off the phone, remove the back cover
2. Take out the original battery
3. Insert the new battery and ensure that the gold-coloured
contact area is facing to the device contact area
4. Apply the back cover
Notes :
• Always wait at least 5 seconds after having turned off the
device before restarting it. Shutting off and immediately
turning on the device can damage the electrical circuits.
The battery life may vary based on usage patterns of the device.
Contact Lexibook® for supply of original parts. Here are some precautions you can take to
keep the phone in good condition:
1. Keep the phone out of children’s reach.
2. Regularly check the mobile equipment in your car to see whether it is correctly installed
and is working normally.
NOTE:
Only use batteries, chargers and accessories approved by the Lexibook®. Use of
other types of batteries, chargers and accessories may cause damage to the phone and
will result in a voided warranty.
ORIGINAL PARTS
CONNECTIVITY
PC CONNECTION
This menu allows you to check, modify, or delete the Data accounts in your phone. Or
it can also enable you to surf the internet when you insert a new SIM card and input the
APN accordingly.
To Add PS account to your phone, please follow below steps:
1. Access “Connectivity” in “Settings”.
2. Select “Data accounts”
3. Select “Add PS account”
4. Then you need to fill in some information of APN.
•
Account name
: Please put in the name.
•
APN:
Please put the APN data here.
•
Username
: Fill in the username here. Password: Fill in the password. It may be blank.
•
Auth. Type
: Usually we tick “Normal” unless necessary.
• Advanced settings
Homepage
: You can make it blank or put in what you prefer.
Connection type
: HTTP as default. You can change this if necessary.
Use proxy
: No as default. You can change this if necessary.
Proxy address/port
: Default. No need to change.
Proxy user name/password
: Default. No need to change.
As for First DNS, Secondary DNS, IP address and Subnet mask, usually there is no need
to change. But if needed, please refer to local operator.
For example, we insert a new T-mobile SIM card:
Account name: T-Mobile Internet
APN: internet.t-mobile
Username: t-mobile Password: tm
(No need to change other settings. It depends on the SIM card. For details, please refer
to local operators.)
Use your SD Memory card or the internal phone memory as a Mass Storage Device
(U-Disk) by simply connecting it to your computer via a micro USB Cable. On the Phones
Screen select “Mass Storage”. Now you can transfer music, videos, games and other files
from your phone to your computer and vice versa.
GSM20seriesIM1344_22Aug_V11.indb 20
22/08/2014 5:17 PM
