Lexicon PCM NATIVE STRINGBOX, Owner'S Manual

3

Strings Window

Stringbox has a unique metering system that shows just which strings are resonating. The 

strings window is a real time visual representation of the piano strings vibrating based on the 

energy in each resonator. There is a string image for each note. If that string is resonating, then 

the string image brightens. 
The Decay/Tone parameters can also be adjusted in this graphical display by selecting 

the group of Decay/Tone parameters, then left clicking and dragging the nodes on the 

corresponding colored line.

Decay/Tone Parameters

Filtering, decay and level can be set here in each of 3 bands. The resulting curve is displayed in 

the strings window, represented by matching color coded lines. 

Level Meters

Shows the input, output and feedback levels. The Feedback meters measure the energy level 

being fed back into the beginning of the delay line. 

Preset Category

Presets for the algorithm are grouped into categories to make them easier to find. Clicking 

in this area will show the list of categories. Selecting a category will load the presets for that 

category in the Preset Selector. 

Preset Selector

Displays the list of presets within the selected category. Selecting a preset from the list will 

cause the preset to be loaded into the plug-in. 

Slider Parameters 

These are the fader type parameters.

Control Buttons

These buttons are used to compare, reload and store presets. This is explained in more detail in 

the “Control Buttons” section of this manual.

Combo Box Parameters

These are the combo box type parameters. Each parameter is described in the “Parameters” 

section starting on page 18.