Setup Menus
RT-10
3-47
ENTER
Country Code
Refer to the table on page A-16
Assigns a security level based on country code, requiring the
password before the RT-10 will activate playback mode when a disc
encoded with an incompatible country code is loaded. The
Country Code control has no effect when the Level control is set
within its 1 to 8 range or when a disc that is not encoded with a
country code is loaded.
To assign a country code:
When the Country Code control is selected, the assigned password
must be entered before a country code can be assigned. When the
current password is confirmed, the Parental Lock: Country Code
screen shown above opens on the on-screen display.
1. When the Parental Lock: Country Code screen opens, use one
of the following methods to select the desired country code:
a.
Press the remote control
and
arrows to scroll through
the complete list of available countries. When the desired
country is highlighted, press the remote control ENTER
button to select that country and return to the General
tab.
b. Press the remote control
arrow to move the cursor to
the first character space that appears on the right of the
on-screen display. Then, use the remote control number
buttons to enter the numeric code for the desired country.
Refer to the table on page A-16 to determine the
appropriate numeric code. When the desired country is
selected, press the remote control ENTER button to return
to the General tab.
. . . General continues on page 3-48
Setup Menu Mode --- Expert
Setup Navigator
Parental Lock --- Off(us)
Bonus Group
Auto Disc Menu --- On
Group Playback --- Single
Audio1
Language
General
Video1
A2
V2
Move
Select
Exit
SETUP
ENTER
Password
Level
Country Code
Parental Lock
Country Code
List of Codes
Code (0~2)
Country Code
2
Audio1
Language
General
Video1
A2
V2
Move
Select
Exit
+/–
Return
us
ENTER
SETUP
1
1
9
