Installation
Warning!
1. Please keep it away from the children.
2. Please avoid fire/high temperature/damp places for installation
.
3. Please confirm when shut off the power cord access.
Warning!
When you are drilling ,please make sure
you wear glasses and dust masks to
prevent the dust fly into the nose and throat
causing unnecessary trouble
.
1
．
Take down the top cover by turning it anti-clockwise(see fig.1), and then tighten off the two screws fixing
middle cover(see fig.2);
2
．
Hold base against the Ceiling and mark drill holes(see fig.3),paying attention to any existing wiring in the
Ceiling;
3
．
Drill the holes, insert wall plugs (6mm dia.)(see fig.4);
4
．
Put the power wire and load wire through the base holes(see fig.5);
5
．
Screw the base into place(see fig.6);
6
．
Connect the mains power supply and the load wire to the connection terminal according to connection-wire
mark.
7
．
Close the middle cover(see fig.6) and adjust knob to setting;
8
．
Fit glass shade and turn it clockwise(see fig.6).
fig.1
fig.2
fig.3
fig.4
N
L’
L
Power 110V / 220V
L
N
Electric products
fig.6
fig.5
Connection illumination
connect N, L with power;
connect N, L’ with load
N L' L
base holes
www.lexing.com.cn
