Power source: 100-240V/AC
Power frequency: 50/60Hz
Transmission power: <0.3mW
Rated load:
2400W/10A,Max,tungsten(cosφ=1)(220-240V/AC)
600W/5A,Max,fluorescent(cosφ=0.5)(220-240V/AC)
1200W/10A,Max,tungsten(cosφ=1)(100-130V/AC)
300W/5A,Max,fluorescent(cosφ=0.5)(100-130V/AC)
Working temperature: -15°C~+70°C
Protection level: IP20,Class II
Installation sit: indoors, ceiling mounting
HF system: 5.8GHz CW electric wave,ISM band
Detection angle: 360°(Ceiling installation),
180°(Wall installation)
Detection range:
1-11m (radii.) (adjustable),(Ceiling installation)
25m Max. (adjustable),(Wall installation)
Time setting: 8sec-12min, (adjustable)
Light-control: 10-1000LUX, (adjustable)
Power consumption: approx.0.5W
Specifications
LX-MV-360S13B Microwave Sensor Instruction
Summary
53.5mm
17.7mm
50mm
36mm
36mm
44mm
50mm
50mm
Features
This is a hi-precision digital microwave sensor whose detection range is 360°and working frequency is
5.8GHz. It is based on Doppler principle which integrates the emitting and receiving. It adopts MCU (Micro
Control Unit) that greatly increases its precision and decreases its fault rate. It’s delicate in appearance and
compact in structure. It can be independently connected to the loads or easily installed inside the lightings with
lampshade made of glass or plastic. It is widely applied in the passageway, washroom, elevator, household or
other public areas for security protection or energy saving. It applies for several technical patents and is the
perfect choice for your intelligent living.
1.Non-radiation harm
: its transmitter power is lower than 0.3mW, which does no harm to human body.
2.Reliable & Stable performance
: it applies the RC filtering and digital filtering in digital processing. It also
uses the digital zero trigger technology, that is, at zero point it will be auto-connected or auto-disconnected. It
uses the Tyco high-power relay to control output, which ensures its reliable performance. It adopts power
management chip to guarantee its stable performance in 100-240V/AC.
3.Remote setting
: it is designed with the remote function, that is, you can preset its function by potentiometer
or remote controller to your practical need.
You can easily set and select the function within 12 meters
.
EN 61058-1:2002+A2:2008
EN 50317:2002
EN 301 489-1 V1.8.1(2008-04)
EN 301 489-3 V1.4.1(2002-08)
EN 300 440-1 V1.5.1(2009-03)
EN 300 440-2 V1.3.1(2009-03)
