LX608 Smoke Alarm Instruction
The product is photoelectric smoke alarm, It is only
used in single room in family. For your safety,you’d
better install one alarm in every room. Before using
it, please read the instruction carefully, don’t open
the alarm casually avoiding working abnormally.
Specifications
Rated power:DC9V
DC9V / 100-130V/AC
DC9V / 220-240V/AC
Static current: 5uA
Alarm current: 10mA
Alarm level: >85db(3m)
Low voltage alarm: 7V±0.5V
Summary
Attentions for installation:
Before you install the alarm, read the instruction carefully and keep it!!!
1. At first you need install one in the bedroom and route way, because the bedroom is far away from the exit
usually, if you have several bedrooms, you’d better install one alarm in every room.
2. Install it in the stairway, because stairway take an important part in emergent situation
。
3. At least install one alarm in every floor.
4. Install one alarm beside the electric appliances in every room.
5. Smoke, heat and burning things will spread horizontally after rising to the ceiling,so install one alarm in the
middle of the ceiling of ordinary structure house. Let the alarm can induce every corner.
6. If alarm can’t be installed in the middle of the ceiling for some reasons, the distance the alarm away from
the wall should be more than 10CM.
7. If install alarm on the wall, it should be 10~30.5CM below the ceiling. (Like the diagram 1)
Where to install best
45mm
138mm
