False alarm
1.The design for the alarm has diminished false alarm to the minimum, a little smoke can’t lead it alarm
generally, except whiffing it into alarm directly. In the kitchen if there is not vent-smoke device, it will lead false
alarm when cooking,
2.When alarming, you should check the alarm cause, if it is fire, please dial alarm telephone If not, check
whether the installation position belongs to the 2 section.
3.Treat every alarm carefully regardless it is false alarm, do not treat it lightly.
Net alarm
If several alarms are connected, when one of them detects the alarm signal, it will alarm and the indictor flash
more and more quickly, the others alarm will alarm(the connection number can only is less than 40pcs.), but
the its indicator won’t flash quickly. The connection diagram see the right.
1. Replace the battery: if there are condition like the 4.3 section, you should replace the battery, install the
battery according to the instruction in battery box. the type can be the following:
Carbon and zinc type: every day 216 or 2122; goldpeak 1604p or 1604s
Alkaline battery : every day 522 duracell mn1604 mx1604;goldpeak 1604A
Lithium battery: ultralife U9VL
2.Test periodically: test 2~3 times every month to ensure normal alarm.
3.Clean alarm: do at least one time every year. at first unfix the alarm, clean the alarm inner with air press
spear or vacuum. clean the shell with wet cloth. after cleaning,install and test it according to the 3, 4 section. If
it can’t work normally, please replace the alarm.
Servicing
1.Operate: fix the battery in alarm and test it, the alarm is in testing
state. when it detects smoke, the alarm will provide the alarm
sound more than 85db until it detect no smoke.
2.shine indication: two working ways
(1) testing state: flashing once every 30 seconds indicate the
operation is normal.
(2) alarm state: when it detects smoke and work, flash once every
0.5sec until detects no smoke and then stops.
(3) test: if the alarm and the battery are normal, press the test
button for 2 seconds, it will be in the testing state. If it don’t alarm,
please check if the battery’s fixing is correct.if the fixing is correct,
probably the alarm has some defect, please contact with the
supply, do not open the alarm yourself, don’t test the alarm with fire.
(4) if there are repetitive and interim low voltage alarm “di”, the
interim time is 30 seconds, it indicate the battery’s energy is
shortage. To ensure normal alarm, please replace the battery.
Operate and test
