63
Secondary error code
What this light sequence means:
The page may not print correctly because the print
information on the page is too complex.
What you can do:
•
Press and release
Continue
to clear the message
and continue processing the print job (some of the
print data may be lost).
•
To avoid this error in the future:
–
Reduce the complexity of the page by reducing
the amount of text or graphics on the page and
deleting unnecessary downloaded fonts or
macros.
–
Set
Page Protect
to On in the Local Printer
Setup Utility.
–
Install additional printer memory (refer to the
Setup Guide for instructions).
Secondary error code
What this light sequence means:
The paper length is too short to print the formatted data. This
occurs when the printer does not know the media size
loaded in the tray, or there is a problem feeding the media.
What you can do:
•
Make sure the print media you loaded is large
enough.
•
Open the printer cover, clear the paper path and
close the cover to resume printing (see
Clearing
jams
).
•
Press and release
Continue
to clear the message
and continue printing the job.
•
Press and release
Cancel
to cancel the print job.
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue Cancel
Press Continue
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue Cancel
Press Continue
