Reports menu
This menu is available from the Network/Ports menu:
Network/Ports
>
Standard Network
or
Network [x]
>
Standard Network Setup
or
Network Setup
>
Reports
or
Network
Reports
Menu item
Description
Print Setup Page
Prints a report containing information about the network printer settings, such as the TCP/IP address
Network Card menu
This menu is available from the Network/Ports menu:
Network/Ports
>
Standard Network
or
Network [x]
>
Standard Network Setup
or
Network [x] Setup
>
Network Card
Menu item
Description
View Card Status
Connected
Disconnected
Lets you view the connection status of the Network Card
View Card Speed
Lets you view the speed of a currently active network card
Network Address
UAA
LAA
Lets you view the network addresses
Job Timeout
0
10–225
Sets the amount of time in seconds before a network print job is canceled
Note:
90 seconds is the factory default setting.
Banner Page
Off
On
Allows the printer to print a banner page
Note:
Off is the factory default setting.
TCP/IP menu
To access the menu, navigate to either of the following:
•
Network/Ports
>
Standard Network
>
Standard Network Setup
>
TCP/IP
•
Network/Ports
>
Network [x]
>
Network [x] Setup
>
TCP/IP
Note:
This menu is available only in network printers or printers that are attached to print servers.
Use
To
Set Hostname
Set the current TCP/IP hostname.
IP Address
View or change the current TCP/IP address.
Note:
Manually setting the IP address sets the Enable DHCP and Enable Auto IP
settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
support BOOTP and RARP.
Netmask
View or change the current TCP/IP netmask.
Understanding the printer menus
102
