Menu item
Description
Font Name
Courier 10
Identifies a specific font and the option where it is stored
Note:
Courier 10 is the factory default setting. Courier 10 shows the font
name, font ID, and the storage location in the printer. The font source
abbreviation is R for Resident, F for Flash, K for Disk, and D for download.
Symbol Set
10U PC
‑
8
12U PC
‑
850
Specifies the symbol set for each font name
Notes:
•
10U PC
‑
8 is the US factory default setting. 12U PC
‑
850 is the international
factory default setting.
•
A symbol set is a set of alphabetic and numeric characters, punctuation,
and special symbols. Symbol sets support the different languages or
specific programs such as math symbols for scientific text. Only the
supported symbol sets are shown.
PCL Emul Settings
Pitch
0.08–100
Specifies the font pitch for scalable monospaced fonts
Notes:
•
10 is the factory default setting.
•
Pitch refers to the number of fixed
‑
space characters per inch (cpi).
•
Pitch can be increased or decreased in 0.01
‑
cpi increments.
•
For nonscalable monospaced fonts, the pitch appears on the display but
cannot be changed.
PCL Emul Settings
Orientation
Portrait
Landscape
Specifies the orientation of text and graphics on the page
Notes:
•
Portrait is the factory default setting. Portrait prints text and graphics
parallel to the short edge of the page.
•
Landscape prints text and graphics parallel to the long edge of the page.
PCL Emul Settings
Lines per Page
1–255
60
64
Specifies the number of lines that print on each page
Notes:
•
60 is the US factory default setting. 64 is the international default setting.
•
The printer sets the amount of space between each line based on the
Lines per Page, Paper Size, and Orientation settings. Select the desired
Paper Size and Orientation before setting Lines per Page.
PCL Emul Settings
A4 Width
198 mm
203 mm
Sets the printer to print on A4
‑
size paper
Notes:
•
198 mm is the factory default setting.
•
The 203
‑
mm setting sets the width of the page to allow the printing of
eighty 10
‑
pitch characters.
PCL Emul Settings
Auto CR after LF
Off
On
Specifies whether the printer automatically performs a carriage return (CR) after
a line feed (LF) control command
Note:
Off is the factory default setting.
Understanding the printer menus
133