d
Secure the brackets with screws.
9
Insert the bases on the slots at the sides of the printer stand and secure them with screws.
10
Turn the printer back on.
11
Set the printer software to recognize the optional input source.
For more information, see
“Adding available options in the print driver” on page 51
.
Installing 550
‑
sheet trays
Notes:
•
The printer supports a maximum of three optional 550
‑
sheet trays.
•
When installing three optional 550
‑
sheet trays, use a printer stand converted into a caster base.
CAUTION—POTENTIAL INJURY:
The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.
Additional printer setup
43