Loading RFID media
Setting the size and type of the RFID media
1
From the home screen, navigate to:
Settings
>
Paper
>
Tray Configuration
>
Paper Size/Type
> select a paper source
2
Set the size and type of the RFID media.
Loading media trays
CAUTION—TIPPING HAZARD:
To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
1
Remove the tray.
Note:
To avoid jams, do not remove trays while the printer is busy.
2
Adjust the guides to match the size of the RFID media that you are loading.
Note:
Use the indicators on the bottom of the tray to position the guides.
3
Load the media stack with the printable side faceup.
The capacity of the media tray is up to 200 sheets. To maximize the capacity, make sure that:
•
The media weight is 75 g/m
²
(20 lb).
•
The RFID tag thickness is not more than 0.35 mm (0.01 in.).
•
The RFID tag is placed toward the back of the tray.
Loading RFID media
20
