79
Operator panel codes
Memory full
Short paper
Light sequence:
•
Continue—On
•
Ready—On
•
Toner Low/Replace PC Kit—On
•
Error—On
What this light sequence means:
The printer is processing data, but the memory used to store pages is full.
What you can do:
•
Press Continue
to clear the message and continue printing the job
(the job may not print correctly).
•
Press and release Cancel
to cancel the print job.
•
Press and hold Cancel
to reset the printer.
•
To avoid this error in the future:
–
Simplify the print job. Reduce the complexity of the page by reducing
the amount of text or graphics on the page and deleting unnecessary
downloaded fonts or macros.
–
Install additional printer memory (see How to add a memory card on
page 50).
Light sequence:
•
Continue—On
•
Ready—On
•
Load Paper—On
•
Error—On
What this light sequence means:
The paper length is too short to print the formatted data. This occurs when the
printer does not know the media size loaded in the tray, or there is a problem feeding
the media.
What you can do:
•
Make sure the print media you loaded is large enough.
•
Open the front cover, clear the paper path, and close the cover to resume
printing (see How to clear paper jams on page 35).
•
Press Continue
to clear the message and continue printing the job.
•
Press Cancel
to cancel the print job.
