Using memory cards and flash drives
Using a memory card or flash drive with the printer
Memory cards and flash drives are storage devices frequently used with cameras and computers. You can remove
the memory card from the camera or the flash drive from the computer and insert it directly into the printer.
1
Insert a memory card into the card slot or a flash drive into the USB port.
Inserting a memory card
Inserting a flash drive
Notes:
•
Insert the card with the brand name label facing right.
•
Make sure any arrows on the card point toward the
printer.
•
If necessary, connect the memory card to the adapter
that came with it.
•
Make sure that the memory card inserted is supported
by the printer. For more information, see “Supported
memory cards and file types” on page 12.
Notes:
•
The flash drive uses the same port that is used for a
PictBridge camera cable.
•
An adapter may be necessary if your flash drive does
not fit directly into the port.
Warning—Potential Damage:
Do not touch any cables, any network adapter,
any connector, the memory device, or the printer in the areas shown while actively
printing, reading, or writing from the memory device. A loss of data can occur.
2
Look for
Memory Card Detected
or
Storage Device Detected
on the display.
Notes:
•
If the printer does not recognize the memory device, then remove and reinsert it.
•
If a flash drive or a digital camera set to mass storage mode is inserted into the USB port while a memory card is
in the card slot, then a message appears on the display prompting you to choose which memory device to use.
About your printer
11
