AppleTalk and MarkNet print servers
Print materials
Supplies
Troubleshooting
Administration
11
Printing
www.lexmark.com
Lexmark J110
binary 9 (for 0.75 sec),
binary 1 (for 0.75 sec),
repeat continuously.
Serial error
Type = Parity
Parity error occurred during serial print job.
1 Reset the print server. (The 9,1 error code
does not go away until you reset the print
server. This is to make sure you see that a
parity error occurred. To turn parity
checking off, use a utility or telnet to port
9000.)
2 Send the job again.
What shows on the
four indicator lights
Description
Cause and solution
