Lexmark M1140 Service Manual Download

Page: 23 / 303

To help avoid paper jams and poor print quality:

•

Always

use new, undamaged paper.

•

Before loading paper, know the recommended printable side of the paper. This information is usually indicated on
the paper package.

•

Do not

use paper that has been cut or trimmed by hand.

•

Do not

mix paper sizes, types, or weights in the same tray; mixing results in jams.

•

Do not

use coated papers unless they are specifically designed for electrophotographic printing.

Selecting preprinted forms and letterhead

Use these guidelines when selecting preprinted forms and letterhead:

•

Use grain long for 60 to 90 g/m

(16 to 24 lb) weight paper.

•

Use only forms and letterhead printed using an offset lithographic or engraved printing process.

•

Avoid papers with rough or heavily textured surfaces.

Use papers printed with heat

‑

resistant inks designed for use in xerographic copiers. The ink must be able to withstand

temperatures up to 230°C (446°F) without melting or releasing hazardous emissions. Use inks that are not affected by
the resin in toner. Inks that are oxidation

‑

set or oil

‑

based generally meet these requirements; latex inks might not.

When in doubt, contact the paper supplier.

Preprinted papers such as letterhead must be able to withstand temperatures up to 230°C (446°F) without melting or
releasing hazardous emissions.

Using recycled paper and other office papers

As an environmentally conscientious company, Lexmark supports the use of recycled paper produced specifically for
use in laser (electrophotographic) printers.

While no blanket statement can be made that all recycled paper will feed well, Lexmark consistently tests papers that
represent recycled cut size copier papers available on the global market. This scientific testing is conducted with rigor
and discipline. Many factors are taken into consideration both separately and as a whole, including the following:

•

Amount of post-consumer waste (Lexmark tests up to 100% post-consumer waste content.)

•

Temperature and humidity conditions (Testing chambers simulate climates from all over the world.)

•

Moisture content (Business papers should have low moisture: 4–5%.)

•

Bending resistance and proper stiffness means optimum feeding through the printer.

•

Thickness (impacts how much can be loaded into a tray)

•

Surface roughness (measured in Sheffield units, impacts print clarity and how well toner fuses to the paper)

•

Surface friction (determines how easily sheets can be separated)

•

Grain and formation (impacts curling, which also influences the mechanics of how the paper behaves as it moves
through the printer)

•

Brightness and texture (look and feel)

Recycled papers are better than ever; however, the amount of recycled content in a paper affects the degree of control
over foreign matter. And while recycled papers are one good path to printing in an environmentally responsible manner,
they are not perfect. The energy required to de-ink and deal with additives such as colorants and “glue” often generates
more carbon emissions than does normal paper production. However, using recycled papers enables better resource
management overall.

4514

General information