manualshive.com logo in svg

Lexmark M3150, Service Manual

The Lexmark M3150 is a high-performance multifunction printer designed for efficiency and productivity. Its robust specifications include fast print speeds, versatile paper handling, and exceptional image quality. Unlock the full potential of this device by downloading the free user manual from 88.208.23.73:8080, offering comprehensive instructions to optimize your printing experience.

Share
Download
background image

Notices and safety information

Laser notices

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for
Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements
of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser
that is nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The
laser system and printer are designed so there is never any human access to laser radiation above a Class I
level during normal operation, user maintenance, or prescribed service condition.

Laser-Hinweis

Der Drucker wurde in den USA zertifiziert und entspricht den DHHS-Vorschriften 21 CFR, Kapitel I, Unterkapitel J
für Laserprodukte der Klasse I (1); andernorts ist er als Laserprodukt der Klasse I zertifiziert, das den IEC 60825-1-
Anforderungen entspricht.

Laserprodukte der Klasse I werden nicht als gefährlich eingestuft. Der Drucker enthält im Inneren einen Laser
der Klasse IIIb (3b), und zwar einen 7-Milliwatt-Gallium-Arsenid-Laser, der im Wellenlängenbereich von 655 bis
675 Nanometern arbeitet. Das Lasersystem und der Drucker sind so konstruiert, dass unter normalen
Betriebsbedingungen, bei der Wartung durch den Benutzer oder bei den vorgeschriebenen
Wartungsbedingungen Menschen keiner Laserstrahlung ausgesetzt sind, die die Werte für Klasse I
überschreitet.

Avis relatif à l'utilisation du laser

L'imprimante est certifiée conforme aux exigences de la réglementation des Etats-Unis relative aux produits
laser (DHHS 21 CFR, Chapter I, Subchapter J for Class I (1)). Pour les autres pays, elle est certifiée conforme aux
exigences des normes IEC 60825-1 relatives aux produits laser de classe I.

Les produits laser de Classe I ne sont pas considérés comme dangereux. L'imprimante contient un laser de
classe IIIb (3b), laser arséniure de gallium 7 milliwatts opérant sur une longueur d'onde de l'ordre de 655 à
675 nanomètres. Le système laser ainsi que l'imprimante ont été conçus de manière à ce que personne ne soit
exposé à des rayonnements laser dépassant le niveau de classe I dans le cadre d'un fonctionnement normal,
de l'entretien par l'utilisateur ou de la maintenance.

Avvertenze sui prodotti laser

La stampante è certificata negli Stati Uniti come stampante conforme ai requisiti DHHS 21 CFR, Capitolo I,
Sottocapitolo J per i prodotti laser di Classe I (1), mentre in altri paesi è certificata come prodotto laser di Classe
I conforme ai requisiti IEC 60825-1.

I prodotti laser di Classe I non sono considerati pericolosi. La stampante contiene un laser di Classe IIIb (3b),
che è nominalmente un laser ad arseniuro di gallio a 7 milliwatt funzionante a una lunghezza d'onda di 655-675
nanometri. Il sistema laser e la stampante sono stati progettati in modo da impedire l'esposizione a radiazioni
laser superiori al livello previsto dalla Classe I durante le normali operazioni di stampa, manutenzione o
assistenza.

4514-6xx

Notices and safety information

13

Summary of Contents for M3150

















































































































































































































































































































































































































Reviews:

No comments

Related manuals for M3150

Xerox 3270 Programmer'S Manual preview
3270
Brand: Xerox Pages: 34
QMS 1660 Operation preview
1660
Brand: QMS Pages: 122
QMS 1660 Reference Manual preview
1660
Brand: QMS Pages: 306
Fastjet F500 Series Operation Manual preview
F500 Series
Brand: Fastjet Pages: 52
Canon i9100 Series Setup Instructions preview
i9100 Series
Brand: Canon Pages: 2
Canon imageRUNNER C3480 Easy Operation Manual preview
imageRUNNER C3480
Brand: Canon Pages: 92
Oki C931dn Manual Del Usuario preview
C931dn
Brand: Oki Pages: 328
Olivetti PG L2035 Quick Installation Manual preview
PG L2035
Brand: Olivetti Pages: 16
Microplex SOLID T11 DT Operator'S Manual preview
SOLID T11 DT
Brand: Microplex Pages: 135
Konica Minolta bizhub C452 Series Replacement Instructions Manual preview
bizhub C452 Series
Brand: Konica Minolta Pages: 17
Radio Shack TRS-80 MICRO Hardware Manual preview
TRS-80 MICRO
Brand: Radio Shack Pages: 42
StarTech.com PM1115UW Setup Manual preview
PM1115UW
Brand: StarTech.com Pages: 13
Oki ColorPainter M-64S User Manual preview
ColorPainter M-64S
Brand: Oki Pages: 84
Parkside PGG 15 B1 Translation Of Original Operation Manual preview
PGG 15 B1
Brand: Parkside Pages: 77
Sagem MF 6990dn User Manual preview
MF 6990dn
Brand: Sagem Pages: 154
Oce OP14 Operation Manual preview
OP14
Brand: Oce Pages: 66
Seiko Epson P130A Manual preview
P130A
Brand: Seiko Epson Pages: 301
Xante Ilumina GL User Manual preview
Ilumina GL
Brand: Xante Pages: 106

Brands by name

Popular brands

Load more brands