Lexmark M3150 Service Manual Download

Page: 207 / 400

Extract the contents of the zip ﬁle, open the

Readme

ﬁle, and then follow the instructions in the ﬁle.

Notes:

•

Perform the install instructions on the

Readme

ﬁle in the exact order shown. Restart the printer only if

the ﬁle says so.

•

For more information on how to ﬂash the downloaded ﬁles, see

“Updating the printer ﬁrmware ” on

page 209

•

To load the zip ﬁles that are extracted from the Service Restore Tool, see

“Restoring solutions,

licenses, and conﬁguration settings” on page 208

After performing the installation instructions in the

Readme

ﬁle, conﬁrm from the customer if all the eSF

apps have been installed.

Notes:

•

If you are unable to access the administrative menus to verify that the printer is restored, then ask the
customer for access rights.

•

If a 10.00 error appears after you restart the printer, then contact the next level of support.

4514-6xx

Parts removal

207

Summary of Contents for M3150

















































































































































































































































































































































































































Search results

Summary of Contents for M3150

Reviews:

Related manuals for M3150

Brands by name

Popular brands

Lexmark M3150, Service Manual

Search results

Summary of Contents for M3150

Reviews:

Related manuals for M3150

Brands by name

Popular brands