Lexmark MX-B557P User Manual Download | Manualshive

Page: 181 / 217

background image

6

Close the access cover.

7

Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

8

Turn on the printer.

Installing a printer hard disk

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, if you are accessing the controller

board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them off as well, and unplug any cables going into the
printer.

1

Turn off the printer.

2

Unplug the power cord from the electrical outlet, and then from the printer.

3

Using a ﬂat

‑

head screwdriver, open the controller board access cover.

Warning—Potential Damage:

Controller board electronic components are easily damaged by static

electricity. Touch a metal surface on the printer before touching any controller board components or
connectors.

Upgrading and migrating

181

«
...
179
180
181
182
183
...
»

Summary of Contents for MX-B557P


























































































































































































































Reviews:

No comments

Related manuals for MX-B557P

Brand: Oki Pages: 2

Brand: Oki Pages: 52

Brand: Oki Pages: 117

Brand: Oki Pages: 45

Brand: Oki Pages: 112

Brand: Oki Pages: 115

Brand: Oki Pages: 2

Brand: Xerox Pages: 48

Brand: Oce Pages: 4

Brand: Magicard Pages: 30

Brand: Magicard Pages: 35

MAGICARD ID Card Printer

Brand: Magicard Pages: 30

Brand: Magicard Pages: 6

4250 - WorkCentre - Copier

Brand: Xerox Pages: 210

4150 - WorkCentre B/W Laser

Brand: Xerox Pages: 4

4118P - WorkCentre B/W Laser

Brand: Xerox Pages: 16

3635MFP - Phaser B/W Laser

Brand: Xerox Pages: 10

3635MFP - Phaser B/W Laser

Brand: Xerox Pages: 42

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands