Lexmark MX-B557P User Manual Download

Page: 96 / 217

Connecting the printer to a wireless network using Wi

‑

Fi Protected Setup

(WPS)

Before you begin, make sure that:

•

The access point (wireless router) is WPS

‑

certiﬁed or WPS

‑

compatible. For more information, see the

documentation that came with your access point.

•

A wireless network adapter is installed in your printer. For more information, see the instructions that came
with the adapter.

•

Active Adapter is set to Auto. From the control panel, navigate to:

Settings

Network/Ports

Network Overview

Active Adapter

For non-touch-screen printer models, press

to navigate through the settings.

Using the Push Button method

From the control panel, navigate to:

Settings

Network/Ports

Wireless

‑

Fi Protected Setup

Start Push Button Method

For non-touch-screen printer models, press

to navigate through the settings.

Follow the instructions on the display.

Using the personal identiﬁcation number (PIN) method

From the control panel, navigate to:

Settings

Network/Ports

Wireless

‑

Fi Protected Setup

Start PIN Method

For non-touch-screen printer models, press

to navigate through the settings.

Copy the eight

‑

digit WPS PIN.

Open a web browser, and then type the IP address of your access point in the address ﬁeld.

Notes:

•

To know the IP address, see the documentation that came with your access point.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Access the WPS settings. For more information, see the documentation that came with your access point.

Enter the eight

‑

digit PIN, and then save the changes.

Maintaining the printer

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands