manualshive.com logo in svg

Lexmark MX71 series, Service Manual

The Lexmark MX71 series offers powerful performance for business needs. Unlock its full potential with the comprehensive Service Manual, available for free download at 88.208.23.73:8080. This manual provides step-by-step instructions, allowing you to effortlessly configure and maintain your Lexmark MX71 series printer for optimal functionality.

Share
Download
background image

Part number index

P/N

Part name

Page

40X0269 Power cord LV, USA & Canada, Latin America.......................................................................................

731

40X0271 Power cord HV, United Kingdom, Asian, Brunei, Cambodia, Indonesia, Laos, Malaysia, 

Myanmar, Philippines, Singapore, Thailand, Vietnam, Afghanistan, Bangladesh, Bhutan, India, 

Nepal, Pakistan, Sri Lanka, Tibet, & Hong Kong.....................................................................................

731

40X0273 Power cord HV, Chile, Uruguay..............................................................................................................

731

40X0275 Power cord, HV, Israel............................................................................................................................

731

40X0288 Power cord HV, Argentina......................................................................................................................

731

40X0301 Power cord HV, Australia & New Zealand..............................................................................................

731

40X0303 Power cord, HV PRC...............................................................................................................................

731

40X0387 USB-A interface device ..........................................................................................................................

729

40X1592 Lexmark MarkNet N7020e (4 port USB) Ethernet 10BaseT/100BaseTX/1000BaseT ............................

729

40X1593 Lexmark MarkNet N7000e (1 port USB) Ethernet 10Base/100BaseTX..................................................

729

40X1594 Lexmark MarkNet N7002e (1 port Parallel) Ethernet 10BaseT/100BaseTX ..........................................

729

40X1766 Power cord HV, Bolivia & Peru...............................................................................................................

731

40X1772 Power cord HV, Switzerland...................................................................................................................

731

40X1773 Power cord HV, South Africa, Namibia, Lesotho, Botswana & Pakistan................................................

731

40X1774 Power cord HV, Denmark, Finland, Norway, Sweden............................................................................

731

40X1791 Power cord LV, Taiwan...........................................................................................................................

731

40X1792 Power cord, HV, Korea...........................................................................................................................

731

40X3141 Power cord HV, Paraguay, Austria, Belgium, France, Germany, Italy, Netherlands, Bluemark, 

Czech & Solvic countries, Greece, Hungary, Medmark 1, Medmark 2, Arabic, Poland, Russia, 

CIS, Spain, Portugal, & Ireland................................................................................................................

731

40X3609 Power cord 100 V, Japan........................................................................................................................

731

40X4596 Power cord LV, Brazil PPB kits................................................................................................................

731

40X4819 RS232C serial adapter............................................................................................................................

729

40X4823 PARALLEL 1284-B THCK adapter.............................................................................................................

729

40X4826 N8120 GIGABIT INA adapter..................................................................................................................

729

40X4827 N8130 10/100 fiber adapter..................................................................................................................

729

40X5315 SHIP-WITH ISP (2PER) screw...................................................................................................................

729

40X5316 14 PIN JST-FOR ISP cable........................................................................................................................

729

40X5317 Tee with thumbscrew standoff..............................................................................................................

729

40X7445 DDR3-512Mx32 2GB RAM card..............................................................................................................

729

40X7567 DDR3-256Mx32 1GB-400MHZ RAM card...............................................................................................

729

7463

Part number index

781

Summary of Contents for MX71 series








































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MX71 series

Panasonic WORKIO DP-CL21 Network Manual preview
WORKIO DP-CL21
Brand: Panasonic Pages: 169
Oki MB760dnfax User Manual preview
MB760dnfax
Brand: Oki Pages: 118
Oki C9650n User Manual preview
C9650n
Brand: Oki Pages: 126
Xerox 82xx Hints And Tips Manual preview
82xx
Brand: Xerox Pages: 8
Oki ML3390 User Manual preview
ML3390
Brand: Oki Pages: 349
Roland VersaCamm SP-300V Manual preview
VersaCamm SP-300V
Brand: Roland Pages: 4
J&Maya JMB4 User Manual preview
JMB4
Brand: J&Maya Pages: 21
Xerox DocuColor 242 Manual preview
DocuColor 242
Brand: Xerox Pages: 128
Oki C7500 V2 Network Manual preview
C7500 V2
Brand: Oki Pages: 107
Minolta PagePro 8 Manual preview
PagePro 8
Brand: Minolta Pages: 227
AstroJet IB-9000-6P Operator'S Manual preview
IB-9000-6P
Brand: AstroJet Pages: 32
Tally T2140 Maintenance Manual preview
T2140
Brand: Tally Pages: 14
Xerox  Manual preview

Brand: Xerox Pages: 48
Roland VersaUV LEF2-300 Service Notes preview
VersaUV LEF2-300
Brand: Roland Pages: 264
Panduit TDP46HET/E User Manual preview
TDP46HET/E
Brand: Panduit Pages: 39
Canon imageRUNNER C3120 Getting Started preview
imageRUNNER C3120
Brand: Canon Pages: 20
Canon imageRUNNER C3170 series Datasheet preview
imageRUNNER C3170 series
Brand: Canon Pages: 12
Canon imageRUNNER C3170 series Service Manual preview
imageRUNNER C3170 series
Brand: Canon Pages: 45

Brands by name

Popular brands

Load more brands