Diagnostic Information
2-27
4045-XXX
Printer does not recognize Tray 2 is installed
Printer displays message “Insert Tray 1” when trying to print from
Tray 2
200 Paper Jam message displays, paper is jammed before the
input sensor OR Tray 2 Empty message displays when tray 2 has
paper in the tray.
FRU
Action
1
Tray 2 Interconnect Cable
Make sure the printer is positioned
correctly on top of tray 2. The tray 2
interconnect cable contacts must
engage the tray 2 cable on the base
printer. Replace the cable if the
contacts are defective.
FRU
Action
1
Tray 1 Inserted Sensor
Check the tray 2 option for correct
installation with the base printer. Run
the Sensor Test in the Hardware Test
Mode to verify the printer detects the
tray 1 present sensor. If the sensor is
not detected, check the sensor for
correct installation and connection at
the tray 2 board. If the installation is
correct, replace the sensor.
FRU
Action
1
Paper Path/Guides/Tray 2
Check the paper path for any foreign
objects. Make sure tray 2 is fully
installed and the lift plate raises
when the tray is inserted.
2
Pick Roll
Check the pick roll for signs of wear
and correct installation. Replace as
necessary.
3
Solenoid
Check the solenoid for correct
operation. Use the Solenoid Test to
check for correct operation. Replace
as necessary.
Summary of Contents for Optra M410
