Diagnostic Aids
3-25
4069-XXX
To run the Print Quality Test Pages:
1. Turn the printer off.
2. Press and hold Select and Return.
3. Turn on the printer.
4. Release the buttons once Performing the Self Test displays.
5. The printer performs its normal POR cycle then print one copy
of the Print Quality Test pages. If you want more than one copy,
perform these steps again.
The following is printed on page 1.
•
Diagnostic EP Setup:
– fuser temperature, warm up time, transfer, print contrast and
charge roll settings.
•
Contents of the Diagnostic Error Log.
•
Printer configuration information:
– printer serial number, controller code level, engine code
level, operator panel code level, smart option code levels,
font versions, and so on.
•
Values for the Quality Menu settings used to print the pages.
Printing Menu Settings Page
Note: This test page must be printed on letter, legal or A4 paper.
To print the Menu Settings Page:
1. Select the TESTS MENU.
2. Select Print Menus from the TESTS MENU.
The page contains the following information:
•
A list of all the printer settings contained in the control panel
menus and their values.
•
A list of the installed options and features such as RAM memory
SIMMs, optional input paper trays, envelope feeder, duplexer,
output bins, flash or disk.
•
Printer information such as serial number, page count, installed
RAM, engine code level, RIP code level, envelope feeder code
level, tray 1-5 code levels, output bin 1-3 code levels, control
panel code levels, font ROM version and SRAM availability.
