2-44
Service Manual
4069-XXX
260 Paper Jam displays, envelope stops in feeder paper path.
Envelope Feeder multifeeds or may not display a 260 Paper Jam
message.
260 Paper Jam displays. An envelope stopped in the paper path of
the feeder and an envelope also stopped in the base printer paper
path.
FRU
Action
1
Kick Rolls/Feed Rolls/Drive
Rolls
Check all the rolls for any signs of oil,
grease or other contamination. If you
find a problem, clean the rolls. If this
does not correct the problem,
replace the envelope feeder option.
2
Deflector Gap Adjustment
Check the deflector gap adjustment.
The adjustment may be too narrow.
FRU
Action
1
Envelopes
Check the envelopes being used in
the feeder. Check for signs of the
envelopes being stuck together or
signs of glue. Check to make sure
the flaps are not interleaved.
2
Deflector
Check the deflector gap adjustment.
The adjustment may be too wide.
3
Restraint Roll Bias Spring
Check for a missing, broken or
incorrectly installed restraint roll bias
spring. If incorrect, reinstall or
replace the spring.
FRU
Action
1
Latch Lever
Check to make sure the tip of the
latch lever is centered in the opening
in the floor of the paper path. The
latch lever may not be detented on
the latch.
