PJL
3-52
ustatus variable=
value
The following values are supported for the
ustatus
variable=
value
parameter.
USTATUSOFF Command
This command turns off unsolicited status. Unsolicited status may also be turned off
by using the USTATUS command on each variable.
Syntax:
@PJL USTATUSOFF[<CR>]<LF>
Table 3-11: USTATUS Unsolicited Status Variable Values
Ustatus Variable
Value
Description
DEVICE
ON
Enables unsolicited status for device changes.
VERBOSE
Enables unsolicited status for all device changes. Also
enables warnings from the PJL parser.
OFF
Disables unsolicited status for device changes.
JOB
ON
Enables unsolicited status for job changes. The
printer sends a status message when a job begins
and ends.
OFF
Disables unsolicited status for job changes.
PAGE
ON
Enables unsolicited status for page changes. The
printer sends a status message when a printed sheet
reaches the standard output bin.
OFF
Disables unsolicited status for page changes.
TIMED
5 to 300 in seconds
Enables timed unsolicited status. The printer
automatically sends status at a specified time interval.
0
Disables timed unsolicited status.
