manualshive.com logo in svg

Lexmark X940E, Technical Reference

The Lexmark X940E is a multifunction printer designed for high-quality printing, copying, scanning, and faxing. To easily access all the features and functionalities of this device, you can download the free manual from our website, ensuring a seamless experience with this versatile product.

Share
Download
background image

 

Edition: March 2009

The following paragraph does not apply to any country where such provisions are inconsistent with local law:

 LEXMARK 

INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR 
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not 
apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these 
changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.
For Lexmark technical support, visit 

support.lexmark.com

.

For information on supplies and downloads, visit 

www.lexmark.com

.

If you don't have access to the Internet, you can contact Lexmark by mail:
Lexmark International, Inc.
Bldg 004-2/CSC
740 New Circle Road NW
Lexington, KY 40550
References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all 
countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, 
program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual 
property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except 
those expressly designated by the manufacturer, are the user’s responsibility.
Lexmark, Lexmark with diamond design, MarkNet, MarkVision, and Optra are trademarks of Lexmark International, Inc., registered in the 
United States and/or other countries. ColorGrade, PerfectFinish, and PictureGrade are trademarks of Lexmark International, Inc.
The following terms are trademarks or registered trademarks of other companies:

PCL® is a registered trademark of the Hewlett-Packard Company. PCL 5 and PCL 6 are Hewlett-Packard Company’s designations of a set 
of printer commands (language) and functions included in its printer products. These printers are intended to be compatible with the PCL 5 
and PCL 6 languages. This means these printers recognize PCL 5 and PCL 6 commands used in various application programs, and that 
the printer emulates the functions corresponding to the commands.
Other trademarks are the property of their respective owners.

Albertus

The Monotype Corporation plc

Antique Olive

Monsieur Marcel OLIVE

Apple-Chancery

Apple Computer, Inc.

Arial

The Monotype Corporation plc

Candid

Agfa Corporation

CG Omega

Product of Agfa Corporation

CG Times

Based on Times New Roman under 

license

from The Monotype Corporation plc, is a
product of Agfa Corporation

Chicago

Apple Computer, Inc.

Clarendon

Linotype-Hell AG and/or its subsidiaries

Eurostile

Nebiolo

Geneva

Apple Computer, Inc.

GillSans

The Monotype Corporation plc

Helvetica

Linotype-Hell AG and/or its subsidiaries

Hoefler

Jonathan Hoefler Type Foundry

ITC Avant Garde Gothic International Typeface Corporation
ITC Bookman

International Typeface Corporation

ITC Lubalin Graph

International Typeface Corporation

ITC Mona Lisa

International Typeface Corporation

ITC Zapf Chancery

International Typeface Corporation

Joanna

The Monotype Corporation plc

Marigold

Arthur Baker

Monaco

Apple Computer, Inc.

New York

Apple Computer, Inc.

Oxford

Arthur Baker

Palatino

Linotype-Hell AG and/or its subsidiaries

Stempel Garamond

Linotype-Hell AG and/or its subsidiaries

Taffy

Agfa Corporation

Times New Roman

The Monotype Corporation plc

TrueType

Apple Computer, Inc.

Univers

Linotype-Hell AG and/or its subsidiaries

Wingdings

Microsoft Corporation

© 1998, 2009 Lexmark International, Inc. 
All rights reserved.
UNITED STATES GOVERNMENT RIGHTS

This software and any accompanying documentation provided under this agreement are commercial computer software and documentation 
developed exclusively at private expense.

Summary of Contents for X940E




















































































































































































































































































































































































































Reviews:

No comments

Related manuals for X940E

Panasonic Panafax UF-7000 Network Connection preview
Panafax UF-7000
Brand: Panasonic Pages: 28
Panasonic KX-PS8000 Setup Manual preview
KX-PS8000
Brand: Panasonic Pages: 68
Panasonic KX-MC6020 Instrucciones De Funcionamiento preview
KX-MC6020
Brand: Panasonic Pages: 120
Panasonic Workio DP-C262 Operating Instructions Manual preview
Workio DP-C262
Brand: Panasonic Pages: 100
Panasonic KX-MB781 - B/W Laser - All-in-One Instrucciones De Funcionamiento preview
KX-MB781 - B/W Laser - All-in-One
Brand: Panasonic Pages: 96
Panasonic Workio DP-6010 Operating Instructions Manual preview
Workio DP-6010
Brand: Panasonic Pages: 130
Oki 10i Maintenance Manual preview
10i
Brand: Oki Pages: 210
Panasonic FP-D355 User Manual preview
FP-D355
Brand: Panasonic Pages: 77
Panasonic FP-7818 Service Manual & Parts Manual preview
FP-7818
Brand: Panasonic Pages: 402
Panasonic DP-8020E Quick Manual preview
DP-8020E
Brand: Panasonic Pages: 54
Panasonic Workio DP-8016P Operating Instructions Manual preview
Workio DP-8016P
Brand: Panasonic Pages: 88
Panasonic DP-1510P Operating Instructions Manual preview
DP-1510P
Brand: Panasonic Pages: 60
Labau TM200 User Manual preview
TM200
Brand: Labau Pages: 19
Xerox 665 User Manual preview
665
Brand: Xerox Pages: 89
Xerox 4215 Operator'S Manual preview
4215
Brand: Xerox Pages: 414
TE Connectivity T3212 Quick Start Manual preview
T3212
Brand: TE Connectivity Pages: 2
TE Connectivity T3200 Replacement Instructions preview
T3200
Brand: TE Connectivity Pages: 2
Oki OKIPAGE14e Setup Manual preview
OKIPAGE14e
Brand: Oki Pages: 28

Brands by name

Popular brands

Load more brands